EEPROM Values for Siemon SFP+ to SFP+ Passive Copper Cables3/1/2010Data Adress01234-5671011121314 - 17181920-353637-3940-5556-596061626365666768-8384-8586-8788-90-9192-949596-127128-255IdentifierExtended ID for transceiverConnector type10G Ethernet ,InfiniBand compliance codesESCON, SONET compliance codes100M,1G Ethernet compliance codesFibre Channel Technology compliance codesFibre Channel Technology, SFP+ cable technolgy codesFibre Channel transmission mediaFibre Channel speedEncodingBit rateRate IdentifierLength (for various types of fiber)Length (cable)Length (OM3)Vendor name (ASCII)Transceiver code (reserved)Vendor IEEE OUIVendor PN (ASCII)Vendor Rev (ASCII)Passive Cable Specifcation CompliancePassive Cable Specifcation ComplianceUnusedCC_BASE check codeOptions (power level, linear receiver)Options (Tx_Disable, Tx_Fault, LOS)Bit Rate, maxBit Rate, minVendor S/N (ASCII)Date Code (ASCII) two low order digits of yearDate Code (ASCII) digits of month (01-12)Date Code (ASCII) day of month (0-31)Lot Code (ASCII) vendor specific or blankDiagnostic MonitoringCC_EXT check codeNot being usedReserved for SFF-8079SFP+ to SFP+(hex)030421010004418480D500670000meters0053,69,65,6D,6F,6E, 20,20,20 …0000,1E,62fill in Siemon PNProduct Rev010000calculated value00000000Siemon S/Nyear of manufacturemonth of manufactureday of manufacture0000calculated valuenot usednot usedName of FieldNotes and additional Description03h = SFP or SFP plus04h = GBIC/SFP function defined by 2-wire interface ID only21h = Copper pigtail01h= 1X Copper passive Infinibant compliance(note: The only available 10G options per SFF-8472 are for fiber modules)04h = 1000BASE-CX41h = Short distance, electrical inter-enclosure84h = electrical inter-enclosure, passive cable80h = Twin axial pairD5h=1200/800/400/200/100 MBytes/sec00 = unspecifiedBit rate per lane in 100 Mb/s, 67h=103x100Mb or 10.3Gb, h =100x100Mb or 10Gb00h = unspecifiedLength in Meters. 01h is used for cables < 1m. Fractional lengths are rounded up to the next integer length.\"Siemon\" followed by spacesSiemon's IEEE company identifierExtra bytes are filled with spaces (20h)Siemon's product drawing revision number. Extra bytes are filled with spaces (20h)01 = Compliance to SFF-8431, Appendix EUnallocatedA check code for Bytes 0-62 inclusiveNot used for passive copperNot used for passive copperUpper bit rate margin, units of %, not specifiedLower bit rate margin, units of %, not specifiedThe serial number for the cable assembly2 digit year (ie 31h, 30h= 10 = 2010)30h, 31h = 01 = January, 30h,32h = 02 = February, etc30h, 31h = 01 (1st day of the month)Not used. Siemon uses S/N for traceabilityNot implementedA check code for Bytes -94 inclusiveCustom EEPROM programming available. Contact Siemon for details.
