您好,欢迎来到尚车旅游网。
搜索
您的当前位置:首页MAX6386XS25D6资料

MAX6386XS25D6资料

来源:尚车旅游网
元器件交易网www.cecb2b.com19-1839; Rev 4; 4/07

SC70/µDFN, Single/Dual Low-Voltage,

Low-Power µP Reset Circuits

General Description

Features

The MAX6381–MAX6390 microprocessor (µP) supervisorycircuits monitor power-supply voltages from +1.8V to♦Factory-Set Reset Threshold Voltages Rangingfrom +1.58V to +4.63V in Approximately 100mV+5.0V while consuming only 3µA of supply current atIncrements

+1.8V. Whenever VCCfalls below the factory-set resetthresholds, the reset output asserts and remains assert-♦±2.5% Reset Threshold Accuracy Overed for a minimum reset timeout period after VTemperature (-40°C to +125°C)above the reset threshold. Reset thresholds are availableCCrises♦Seven Reset Timeout Periods Available: 1ms,from +1.58V to +4.63V, in approximately 100mV incre-20ms, 140ms, 280ms, 560ms, 1120ms, ments. Seven minimum reset timeout delays ranging1200ms (min)from 1ms to 1200ms are available.

♦3 Reset Output Options

The MAX6381/MAX6384/MAX6387 have a push-pullActive-Low Push-Pullactive-low reset output. The MAX6382/MAX6385/Active-High Push-PullMAX6388 have a push-pull active-high reset output,Active-Low Open-Drain

and the MAX6383/MAX6386/MAX63/MAX6390 have an open-drain active-low reset output. The♦Reset Output State Guaranteed Valid Down to VMAX6384/MAX6385/MAX6386 also feature aCC= 1V

debounced manual reset input (with internal pullup♦Manual Reset Input (MAX6384/MAX6385/MAX6386)resistor). The MAX6387/MAX6388/MAX63 have an♦Auxiliary RESETauxiliary input for monitoring a second voltage. The(MAX6387/MAX6388/MAX63)

IN

MAX6390 offers a manual reset input with a longer Vreset timeout period (1120ms or 1200ms) and a shorterCC♦VCCReset Timeout (1120ms or 1200ms)/ManualReset Timeout (140ms or 150ms) (MAX6390)manual reset timeout (140ms or 150ms).

The MAX6381/MAX6382/MAX6383 are available in ♦Negative-Going VCCTransient Immunity3-pin SC70 and6-pinµDFNpackages and the♦Low Power Consumption of 6µA at +3.6V MAX6384–MAX6390 are available in 4-pin SC70 and and 3µA at +1.8V6-pin µDFN packages.♦Pin Compatible with

ApplicationsMAX809/MAX810/MAX803/MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX6348, ComputersCritical µP and µCand MAX6711/MAX6712/MAX6713

Controllers

Power Monitoring♦Tiny 3-Pin/4-Pin SC70 and 6-Pin µDFNPackages

Intelligent Instruments

Portable/Battery-Powered EquipmentOrdering Information

Dual Voltage Systems

PARTTEMP RANGEPIN-PKGPACKAGECODEPin Configurations

MAX6381LT_ _D_+T-40°C to +125°C6 µDFN-6L611-1TOP VIEWMAX6381XR_ _D_+T-40°C to +125°C3 SC70-3X3-2GNDN.C.VCCMAX6382LT_ _D_+T-40°C to +125°C6 µDFN-6L611-16MAX6382XR_ _D_+T-40°C to +125°C3 SC70-3X3-2GND1Note:Insert reset threshold suffix (see Reset Threshold table)MAX6381after \"XR\MAX63823VCCMAX6381Timeout Delay table) after \"D\" to complete the part number.Sample stock is generally held on standard versions only (seeRESETMAX6383MAX6382Standard Versions table). Standard versions have an order(RESET)2MAX6383increment requirement of 2500 pieces. Nonstandard versionshave an order increment requirement of 10,000 pieces.SC70123Contact factory for availability of nonstandard versions.RESETN.C.N.C+Denotes a lead-free package.

( ) IS FOR MAX6382(RESET)µDFNOrdering Information continuedat end of data sheet.

Pin Configurations continued at end of data sheet.Typical Operating Circuit appears at end of data sheet.Selector Guide appears at end of data sheet.

________________________________________________________________Maxim Integrated Products

1

For pricing, delivery, and ordering information,please contact Maxim Direct at 1-888-629-42,or visit Maxim’s website at www.maxim-ic.com.

MAX6381–MAX6390元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset CircuitsMAX6381–MAX6390ABSOLUTE MAXIMUM RATINGS

VCC to GND..........................................................-0.3V to +6.0VRESETOpen-Drain Output....................................-0.3V to +6.0VRESET, RESET (push-pull output)..............-0.3V to (VCC+ 0.3V)MR, RESET IN.............................................-0.3V to (VCC+ 0.3V)Input Current (VCC).............................................................20mAOutput Current (all pins).....................................................20mA

Continuous Power Dissipation (TA= +70°C)

3-Pin SC70 (derate 2.9mW/°C above +70°C)..............235mW4-Pin SC70 (derate 3.1mW/°C above +70°C)..............245mW6-Pin µDFN (derate 2.1mW/°C above +70°C)..........167.7mWOperating Temperature Range.........................-40°C to +125°CStorage Temperature Range.............................-65°C to +150°CLead Temperature (soldering, 10s).................................+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functionaloperation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure toabsolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

(VCC= full range, TA= -40°C to +125°C, unless otherwise specified. Typical values are at TA= +25°C.) (Note 1)

PARAMETEROperating Voltage RangeSYMBOLVCCVCC = 5.5V, no loadVCC Supply CurrentICCVCC = 3.6V, no loadVCC = 2.5V, no loadVCC = 1.8V, no loadVCC Reset Threshold(See Reset Thresholds table)Reset Threshold TempcoVCC to Reset DelayTA = +25°CVTHTA = -40°C to +125°C∆VTH/°CVCC falling at 10mV/µs from VTH + 100mVto VTH - 100mVD1D2Reset Timeout PeriodMAX6381–MAX63(See Reset Timeout table)D3tRPD5D6D4D7Reset Timeout PeriodMAX6390MR timeout periodtRPVCC timeout periodVILVTH < 4VMR Input VoltageVIHVILVIHVTH > 4V0.7 xVCC0.82.4D4D7D4D71201402805601120120014015011201200VTH -1.5%VTH -2.5%CONDITIONSMIN1.073VTHVTH6035240280560112022402400280300224024000.3 xVCCVmsmsTYPMAX5.5131176VTH +1.5%VTH +2.5%µAUNITSVVppm/°Cµs2_______________________________________________________________________________________元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage,

Low-Power µP Reset Circuits

ELECTRICAL CHARACTERISTICS (continued)(VCC= full range, TA= -40°C to +125°C, unless otherwise specified. Typical values are at TA= +25°C.) (Note 1)PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITSMR Minimum Input Pulse Width1µsMR Glitch Rejection100nsMR to Reset Delay200nsMR Internal Pullup ResistanceMAX6381–MAX633263100kΩMAX639050015603000ΩTA = +25°C1.2451.271.295RESET IN Input ThresholdVTHRSTTA = 0°C to +85°C1.2321.308VTA = -40°C to +125°C1.2191.321RESET IN to RESET DelayVRESETIN falling at 4mV/µs fromVTHRST4.5µs + 40mV to VTHRST - 40mVRESET IN Input Leakage CurrentIRESET IN-50±1+50nAOpen-Drain RESET OutputVCC ≥ 4.5V, ISINK = 3.2mA, reset asserted0.4VoltageVOLVCC ≥ 2.5V, ISINK = 1.2mA, reset asserted0.3VVCC ≥ 1.0V, ISINK = 80µA, reset asserted0.3Open-Drain RESET OutputLeakage CurrentILKGVCC > VTH, RESET not asserted1.0µAVCC ≥ 4.5V, ISINK = 3.2mA, reset asserted0.4VOLVCC ≥ 2.5V, ISINK = 1.2mA, reset asserted0.3VCC ≥ 1.0V, ISINK = 80µA, reset asserted0.3Push-Pull RESET Output VoltageVCC ≥ 4.5V, ISOURCE = 800µA, reset not0.8 xVVassertedVCCOHVCC ≥ 2.5V, ISOURCE = 500µA, reset not0.8 xassertedVCCVCC0.8 x ≥ 4.5V, ISOURCE = 800µA, reset assertedVCCVCC0.8 x ≥ 2.5V, ISOURCE = 500µA, reset assertedVVCCOHVCC0.8 x ≥ 1.8V, ISOURCE = 150µA, reset assertedPush-Pull RESET Output VoltageVCCVVCC ≥ 1.0V, ISOURCE = 1µA, reset asserted0.8 xVCCVCC ≥ 4.5V, ISINK = 3.2mA, reset notasserted0.4VOLVCC ≥ 2.5V, ISINK = 1.2mA, reset notasserted0.3Note 1:Specifications over temperature are guaranteed by design, not production tested._______________________________________________________________________________________3

MAX6381–MAX6390元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset CircuitsMAX6381–MAX6390Typical Operating Characteristics(TA = +25°C, unless otherwise noted.)

SUPPLY CURRENT vs. TEMPERATURE

(NO LOAD)

MAX6381/90 toc01POWER-DOWN RESET DELAY

vs. TEMPERATURE

NORMALIZED RESET TIMEOUT PERIOD41POWER-DOWN RESET DELAY (µs)3937353331292725

VCC = +1.8VMAX6381/90 toc02NORMALIZED POWER-UP RESET TIMEOUT

vs. TEMPERATURE

MAX6381/90 toc0398SUPPLY CURRENT (µA)763210

VCC = +2.5VVCC = +1.8VVCC = +5.5VVCC = +3.6V43

VCC = +3V1.081.061.041.021.000.980.960.94

-40-25-105203550658095110125

TEMPERATURE (°C)

-40-25-105203550658095110125

TEMPERATURE (°C)

-40-25-105203550658095110125

TEMPERATURE (°C)

NORMALIZED RESET THRESHOLD

vs. TEMPERATURE

MAX6381/90 toc04OUTPUT-VOLTAGE LOWvs. SINK CURRENT

MAX6381/90 toc05OUTPUT-VOLTAGE HIGHvs. SOURCE CURRENT

VCC = +2.5VMAX6381/90 toc061.020NORMALIZED RESET THRESHOLD1.0151.0101.0051.0000.9950.9900.985

1.21.00.8

3.02.52.0VOH (V)1.51.0

VCC = +1.8VVOL (V)0.6

VCC = +3.0V0.40.200

3

6ISINK (mA)

9

12

VCC = +4.5V0.500

250

500

750

1000

1250

1500

ISOURCE (µA)

0.990

-40-25-105203550658095110125

TEMPERATURE (°C)

MAXIMUM TRANSIENT DURATIONvs. RESET COMPARATOR OVERDRIVE

MAX6381/90 toc07RESET IN TO RESET DELAY

vs. TEMPERATURE

5.35.1RESET IN DELAY (µs)4.94.74..34.13.93.73.5

MAX6381/90 toc08500MAXIMUM TRANSIENT DURATION (µs)450400350300250200150100500

1

10

100

RESET ASSERTEDABOVE THIS LINE5.5

1000-40-25-105203550658095110125

TEMPERATURE (°C)

RESET COMPARATOR OVERDRIVE, VTH - VCC (mV)

4______________________________________________________________________________________

元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage,

Low-Power µP Reset Circuits

Pin Description

PIN3-PIN SC704-PIN SC70µDFNMAX6381/MAX6384/NAMEFUNCTIONMAX6383MAX6382MAX6386/MAX6385MAX6387/MAX6390MAX6MAX6388Active-High Push-Pull Reset Output.RESET changes from low to high when1any monitored voltage (VCC or (MAX6382/VRESETIN) drops below the resetMAX6385/2—2—2RESETthreshold or MR is pulled low. RESETMAX6388)remains high for the reset timeoutperiod after monitored voltages exceedthe reset thresholds or MR is released.Acti ve- Low Op en- Dr a i n/P ush- Pu l l Reset1Outp ut. RE S ET chang es fr om hi gh to l ow (MAX6381/w hen any m oni tor ed vol tag e ( VC C or MAX6383/V RE S ET IN ) d ro p s b el ow the r eset thr eshol d MAX6384/2—2—2—RESETor M R i s p ul le d l ow . RE S ET r em ai ns l ow for MAX6386/the r eset ti me out p er io d after the m oni tor ed MAX6387/vol tag es exceed the r eset thr eshol ds or M RMAX6390)i s r el eased . O pe n- dr ai n r eq ui re s anexter nal p ul lu p r esi stor .2, 3, 5(MAX6381/MAX6382/MAX6383)——————N.C.No Connection. Not Internally2, 5connected.(MAX6384–MAX6390)Active-Low Manual Reset Input. Drive3low to force a reset. Reset remains(MAX6384/active as long as MR is low and for theMAX6385/——33——MRreset timeout period after MR isMAX6386/released. Leave unconnected orMAX6390)connect to VCC if unused. MR has aninternal 63kΩ (1.56kΩ for MAX6390)pullup resistor to VCC.Auxi li a r y Reset Inp ut. H ig h - im p e d ance3i np ut to the auxi li a r y r eset com p ar ator . (MAX6387/RESETC onnect RE SE T IN to the center p oi nt ofMAX6388/————33INan exter nal r esi stor vol tag e- di v i de r MAX63)netw or k to set the r eset thr eshol d vol tag e.Reset asser ts w hen ei ther V CC or RE SE T IN fal ls b el ow i ts thr eshol d vol tag e.4 (MAX6381–334444VCCSupply Voltage for the device and inputMAX6390)for fixed VCC reset threshold monitor.6(MAX6381–111111GNDGroundMAX6390)_______________________________________________________________________________________5MAX6381–MAX6390元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset CircuitsMAX6381–MAX6390Detailed Description

RESET Output

A µP reset input starts the µP in a known state. TheseµP supervisory circuits assert reset to prevent codeexecution errors during power-up, power-down, orbrownout conditions.

Reset asserts when VCCis below the reset threshold;once VCCexceeds the reset threshold, an internal timerkeeps the reset output asserted for the reset timeoutperiod. After this interval, reset output deasserts. Resetoutput is guaranteed to be in the correct logic state forVCC≥1V.

Reset Thresholds (-40°C to +125°C)SUFFIX4443424140393837363534333231302928272625242322212019181716VTH (min)4.514.394.274.194.104.003.903.803.713.613.513.413.323.223.123.002.932.852.732.632.562.442.342.262.132.051.951.851.761.621.VTH (nom)4.634.504.384.304.204.104.003.903.803.703.603.503.403.303.203.083.002.932.802.702.632.502.402.312.192.102.001.901.801.671.58VTH (max)4.744.614.484.414.314.204.104.003.903.793.693.593.493.383.283.153.083.002.872.772.692.562.462.372.242.152.051.951.851.711.61Manual Reset Input (MAX6384/MAX6385/MAX6386/MAX6390)

Many µP-based products require manual reset capabil-ity, allowing the operator, a test technician, or externallogic circuitry to initiate a reset. A logic low on MRasserts reset. Reset remains asserted while MRis low,and for the reset active timeout period (tRP) after MRreturns high. This input has an internal 63kΩpullupresistor (1.56kΩfor MAX6390), so it can be left uncon-nected if it is not used. MRcan be driven with TTL orCMOS logic levels, or with open-drain/collector outputs.Connect a normally open momentary switch from MRtoGND to create a manual-reset function; externaldebounce circuitry is not required. If MRis driven fromlong cables or if the device is used in a noisy environ-ment, connecting a 0.1µF capacitor from MRto GNDprovides additional noise immunity.

RESET IN Comparator

(MAX6387/MAX6388/MAX63)

RESET IN is compared to an internal +1.27V reference.If the voltage at RESET IN is less than 1.27V, resetasserts. Use the RESET IN comparator as a user-adjustable reset detector or as a secondary power-sup-ply monitor by implementing a resistor-divider at RESETIN (shown in Figure 1). Reset asserts when either VCCor RESET IN falls below its respective threshold volt-age. Use the following equation to set the threshold:

VINTH= VTHRST (R1/R2 + 1)where VTHRST= +1.27V. To simplify the resistor selec-tion, choose a value of R2 and calculate R1:

R1 = R2 [(VINTH/VTHRST) - 1]

Since the input current at RESET IN is 50nA (max),large values can be used for R2 with no significant lossin accuracy.

___________Applications Information

In addition to issuing a reset to the µP during power-up,power-down, and brownout conditions, theMAX6381–MAX6390 are relatively immune to short dura-tion negative-going VCCtransients (glitches).

The Typical Operating Characteristicssection shows theMaximum Transient Durations vs. Reset ComparatorOverdrive, for which the MAX6381–MAX6390 do notgenerate a reset pulse. This graph was generated using

Negative-Going VCCTransients

6_______________________________________________________________________________________

元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage,

Low-Power µP Reset Circuits

VCCVCCVINMAX6387MAX6388MAX6381R1MAX63MAX6384MAX6387RESET INRESETRESETR2(RESET)R1GNDGND100k( ) IS FOR MAX6388Figure 1. RESET IN ConfigurationFigure 2. RESET Valid to VCC = Ground CircuitReset Timeout DelaySUFFIXMINdoes not work with the open-drain outputs of theD11msMAX6383/MAX6386/MAX63/MAX6390. The resistorvalue used is not critical, but it must be small enoughD220msnot to load the reset output when VD3140msreset threshold. For most applications, 100kCCis above theΩis ade-D5280msquate.

D6560msD41120msD71200msMAX6390_ _D41120/140ms*Standard VersionsMAX6390_ _D71200/150ms*PARTRESETTHRESHOLDRESET TIMEOUT*The MAX6390 has a 1120ms or 1200ms RESETtimeout and a140ms or 150ms manual reset timeout.46a negative-going pulse applied to VCC, starting above44the actual reset threshold and ending below it by the31magnitude indicated (reset comparator overdrive). The29graph indicates the typical maximum pulse width a neg-ative-going VCCtransient may have without causing aMAX638_26D3reset pulse to be issued. As the magnitude of the tran-23sient increases (goes farther below the reset threshold),22the maximum allowable pulse width decreases. A 0.1µF17capacitor mounted as close as possible to VCCprovidesadditional transient immunity.

16Ensuring a Valid RESET44Output Down to VCC= 0V

The MAX6381–MAX6390 are guaranteed to operate31properly down to V29valid reset levels down to VCC= 1V. In applications that requireCC= 0V, a pulldown resistorMAX639026D4to active-low outputs (push/pull only, Figure 2) and a23pullup resistor to active-high outputs (push/pull only)will ensure that the reset line is valid while the reset out-22put can no longer sink or source current. This scheme

1716_______________________________________________________________________________________7

MAX6381–MAX6390元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset CircuitsMAX6381–MAX6390Selector Guide

PART NUMBERMAX6381MAX6382MAX6383MAX6384MAX6385MAX6386 MAX6390*MAX6387MAX6388MAX63XXXXXXXPUSH-PULLACTIVE-LOWXXXXXXXXXXPUSH-PULLACTIVE-HIGHOPEN-DRAINACTIVE-LOWMANUAL RESETINPUT MRRESET IN*The MAX6390 offers a VCCreset timeout of 1120ms or 1200ms (min) and a manual reset timeout of 140ms or 150ms (min).Typical Operating CircuitI/O SUPPLYVCORER1RESET IN **R1MAX6381–MAX6390MR *RESET(RESET)GNDPUSHBUTTON SWITCHRESETINPUTGNDVCCCOREI/OVOLTAGEVOLTAGEµPOrdering Information (continued)PARTTEMP RANGEPIN-PACKAGE6 µDFN-63 SC70-36 µDFN- SC70-46 µDFN- SC70-46 µDFN- SC70-46 µDFN- SC70-46 µDFN- SC70-46 µDFN- SC70-46 µDFN- SC70-4PKGCODEL611-1X3-2L611-1X4-1L611-1X4-1L611-1X4-1L611-1X4-1L611-1X4-1L611-1X4-1L611-1X4-1MAX6383LT_ _D_+T-40°C to +125°CMAX6383XR_ _D_+T-40°C to +125°CMAX6384LT_ _D_+T-40°C to +125°CMAX6384XS_ _D_+T-40°C to +125°CMAX6385LT_ _D_+T-40°C to +125°CMAX6385XS_ _D_+T-40°C to +125°CMAX6386LT_ _D_+T-40°C to +125°CMAX6386XS_ _D_+T-40°C to +125°CMAX6387LT_ _D_+T-40°C to +125°CMAX6387XS_ _D_+T-40°C to +125°CMAX6388LT_ _D_+T-40°C to +125°CMAX6388XS_ _D_+T-40°C to +125°CMAX63LT_ _D_+T-40°C to +125°CMAX63XS_ _D_+T-40°C to +125°CMAX6390LT_ _D_+T-40°C to +125°CMAX6390XS_ _D_+T*-40°C to +125°C*MRis for MAX6384/MAX6385/MAX6386/MAX6390**RESET IN is for MAX6387/MAX6388/MAX63( ) are for MAX6382/MAX6385/MAX6388Note:Insert reset threshold suffix (see Reset Threshold table)after \"XR\Timeout Delay table) after \"D\" to complete the part number.Sample stock is generally held on standard versions only (seeStandard Versions table). Standard versions have an orderincrement requirement of 2500 pieces. Nonstandard versionshave an order increment requirement of 10,000 pieces.Contact factory for availability of nonstandard versions.*MAX6390 is available with D4 or D7 timing only.+Denotes a lead-free package.

8

_______________________________________________________________________________________

元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage,

Low-Power µP Reset Circuits

Pin Configurations (continued)

TOP VIEWGNDN.C.VCC6GND14VCCMAX6384MAX6384MAX6385MAX6385MAX6386MAX6386MAX6390MAX6390RESET123(RESET)23MRRESETN.C.MR(RESET)SC70µDFN( ) IS FOR MAX6385( ) IS FOR MAX6385GNDN.C.VCCGND14VCC6MAX6387MAX6388MAX6387MAX63MAX6388MAX63RESET23(RESET)213RESET INRESETN.C.RESET IN(RESET)SC70µDFN( ) IS FOR MAX6388( ) IS FOR MAX6388Chip Information

TRANSISTOR COUNT: 7PROCESS: BiCMOS

_______________________________________________________________________________________9

MAX6381–MAX6390元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset CircuitsMAX6381–MAX6390Package Information

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)

SC70, 4L.EPSPACKAGE OUTLINE, 4L SC7021-0098E1110______________________________________________________________________________________

元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage,

Low-Power µP Reset Circuits

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)SPE.L3 ,07CSPACKAGE OUTLINE, 3L SC7021-0075C11______________________________________________________________________________________11

MAX6381–MAX6390元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset Circuits90Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)36XAM–1836XAM12SPE.TOPMARK3N2F5AebDU4456 L6PIN 1AA0.075x45∞ELPIN 11A2321MARKDA1L1A AL2TOP VIEWSIDE VIEWBOTTOM VIEWCOMMON DIMENSIONSbMIN.NOM.MAX.A0.650.720.80A1--0.20--A20.00--0.05D1.451.501.55SECTION A-AE0.951.001.05L0.300.350.40L10.00--0.08L20.05--0.10b0.170.200.23e0.50 BSC.Pkg.CodeL611-1, L611-2TITLE:PACKAGE OUTLINE, 6L uDFN, 1.5x1.0x0.8mmAPPROVALDOCUMENT CONTROL NO.REV.-DRAWING NOT TO SCALE-21-0147E12______________________________________________________________________________________

元器件交易网www.cecb2b.comSC70/µDFN, Single/Dual Low-Voltage,

Low-Power µP Reset Circuits

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)TABLE 1 Translation Table for Calendar Year CodeCalendar Year2005200620072008200920102011201220132014Legend:Marked with barBlank space - no bar requiredTABLE 2 Translation Table for Payweek Binary CodingPayweek06-1112-1718-2324-2930-3536-4142-4748-5152-05Legend:Marked with barBlank space - no bar requiredTITLE:PACKAGE OUTLINE, 6L uDFN, 1.5x1.0x0.8mmAPPROVALDOCUMENT CONTROL NO.REV.-DRAWING NOT TO SCALE-21-0147E22Revision History

Pages changed at Rev 4: Title on all pages, 1, 2, 5,

7–13

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses areimplied. Maxim reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600____________________13©2007 Maxim Integrated Products

is a registered trademark of Maxim Integrated Products, Inc.

MAX6381–MAX6390

因篇幅问题不能全部显示,请点此查看更多更全内容

Copyright © 2019- sceh.cn 版权所有 湘ICP备2023017654号-4

违法及侵权请联系:TEL:199 1889 7713 E-MAIL:2724546146@qq.com

本站由北京市万商天勤律师事务所王兴未律师提供法律服务