您好,欢迎来到尚车旅游网。
搜索
您的当前位置:首页站场接触网平面设计

站场接触网平面设计

来源:尚车旅游网


摘 要

设计目的是完成***车站接触网工程设计,按照工程要求绘制接触网平面设计图和接触网设备装配图。

铁路作为国家重要的基础设施、国民经济的大动脉和大众化的交通工具,具有运能大、能耗省、占地少、污染轻、全天候、高效率等特点,对经济社会发展有着巨大的影响。车站对保证运输工作质量起着决定作用。铁路车站及枢纽的能力是铁路运输能力的主要组成部分。因此,合理规划车站及枢纽总图,具有重要的意义。

设计首先对***车站接触网工程背景、设计内容、设计依据、设计原则及设计目标做了简要叙述,并对设计要完成的主要工作进行了描述。结合***车站实际,设计中充分考虑了当地气象环境和线路情况的条件,进行了线材选择和站场布置,并进行了接触网控制参数、设计时速、风偏移值、最大跨距以及锚段长度的计算,分析了***车站软横跨结构图,进行了预制计算,接着按照放图、支柱布置、锚段划分、接触线拉出值确定、支柱类型确定、场内典型支柱的校验等步骤,绘制了满足高速电气化铁路要求的***车站接触网平面设计图;最后对***车站接触网设备装配图的设计要求及主要参数进行了说明。

论文设计结合实际,图纸设计符合现场要求,对类似工程设计可提供一定的参考价值。

关键词:电气化铁路;接触网;设计计算;平面设计图

Abstract

The object is to finish the design of overhead contact system project for Akes

u Railway Station, and to draw its graphic draft and device assembly drawing.

Railway as a national critical infrastructure, the main artery of the national economy and popular means of transport, has the characteristics of transport capacity, the energy consumption of province, small footprint, light pollution, all-weather, high efficiency and other characteristics, and have a huge impact on the economic and social development. The station plays a decisive role in ensuring the quality of the transportation work. Railway stations and the ability of the hub is a major component of the railway transport capacity. Therefore, the rational planning of the general layout of the station and hub is of great significance.

First of all, the project background, design scope, design standards and design purpose of are presented, and main works for the design are sketched. Under the comprehensive consideration of the local meteorological environment and line situation with combination of current situation of Akesu Railway Station, the line material selection and station arrangement are carried out, and some control parameters, design speed, wind deviant and length of anchor-section are calculated, and head span suspension structure draft is analyzed, and then the prefabricated values are calculated, after then the graphic design draft for Akesu Railway Station is drawn according to the following procedures, that is, frame design, anchor-section partitioning, contact line stagger determination, support-post type selection and local typical support-post verification with the requirements of high-speed electrified railway met. Finally, the design demands and main parameters of OCS for Akesu Railway Station are expounded.

The drawings design accords with the requirements of local field with the combination of actual situation, and will provide some reference value to similar project design.

Key Words: Electrified railway, Contact system, Design calculate, Graphic design

因篇幅问题不能全部显示,请点此查看更多更全内容

Copyright © 2019- sceh.cn 版权所有 湘ICP备2023017654号-4

违法及侵权请联系:TEL:199 1889 7713 E-MAIL:2724546146@qq.com

本站由北京市万商天勤律师事务所王兴未律师提供法律服务